To install IIAB 8.0 onto Raspberry Pi OS, Ubuntu 20.04+, Linux Mint 20+ or Debian 11+, simply run this 1-line installer:
On a Raspberry Pi, WE RECOMMEND YOU INSTALL THE LATEST RASPBERRY PI OS (32-bit OR 64-bit), using their detailed instructions if necessary. WARNING: THE NOOBS OS IS *NOT* SUPPORTED, as its partitioning is very different. To attempt an IIAB install onto a non-supported Linux distribution (AT YOUR OWN RISK) see also the manual/legacy instructions.
An Ethernet cable is highly recommended during installation. This is not only more reliable, but also allows an internal IIAB hotspot to be set up without confusion. WARNING: IF YOU CONNECT YOUR IIAB'S INTERNAL WIFI TO THE INTERNET OVER 5 GHz, YOU'LL PREVENT OLDER LAPTOPS/PHONES/TABLETS (WHICH REQUIRE 2.4 GHz) FROM CONNECTING TO YOUR IIAB'S INTERNAL HOTSPOT. For AP+STA mode, set "wifi_up_down: True" in /etc/iiab/local_vars.yml (example).
Please contact us if you find issues, Thank You! Special Thanks to the countries + communities + volunteers working non-stop to bring about IIAB 8.0 !
IIAB Dev Team
Internet-in-a-Box (IIAB) 7.1 can be installed from this page. Please read our IIAB 7.1 Release Notes. To install IIAB 7.1 onto Raspberry Pi OS, Ubuntu 20.04 or Debian 10, run this 1-line installer: curl d.iiab.io/7.1/install.txt | sudo bash OS TIPS & TRICKS: click the above link (that ends in .txt) for important recommendations on how to PREPARE & SECURE YOUR OS. WARNING: NOOBS IS *NOT* SUPPORTED, as its partitioning is very different. On a Raspberry Pi, PLEASE INSTALL THE LATEST 32-BIT RASPBERRY PI OS. To attempt IIAB 7.1 on another Linux see the full/manual instructions. An Ethernet cable is HIGHLY RECOMMENDED during installation, as this is more reliable than Wi-Fi (and faster too!) Thanks For Building Your Own Library To Serve One & All Write to bugs @ iiab.io if you find issues, Thank You! Special Thanks to the countries+communities+volunteers working non-stop to bring about IIAB 7.1! IIAB Development Team http://FAQ.IIAB.IO